Abstract class that defines the interface for all authentication configuration storage implementations. More...

#include <qgsauthconfigurationstorage.h>

Inheritance diagram for QgsAuthConfigurationStorage:

[legend]

Classes
struct	MasterPasswordConfig
	Structure that holds the (encrypted) master password elements. More...

struct	SettingParameter
	Storage configuration setting parameter. More...

Signals
void	authSettingsChanged ()
	Emitted when the storage auth settings table was changed.

void	certAuthorityChanged ()
	Emitted when the storage cert authority table was changed.

void	certIdentityChanged ()
	Emitted when the storage cert identity table was changed.

void	masterPasswordChanged ()
	Emitted when the storage master password table was changed.

void	messageLog (const QString &message, const QString &tag=QStringLiteral("Authentication"), Qgis::MessageLevel level=Qgis::MessageLevel::Info)
	Custom logging signal to relay to console output and QgsMessageLog.

void	methodConfigChanged ()
	Emitted when the storage method config table was changed.

void	readOnlyChanged (bool readOnly)
	Emitted when the storage read-only status was changed.

void	sslCertCustomConfigChanged ()
	Emitted when the storage ssl cert custom config table was changed.

void	sslCertTrustPolicyChanged ()
	Emitted when the storage ssl cert trust policy table was changed.

void	storageChanged (const QString &id)
	Emitted when the storage was updated.

Public Member Functions
	QgsAuthConfigurationStorage (const QMap< QString, QVariant > &settings)
	Creates a new authentication configuration storage.

virtual	~QgsAuthConfigurationStorage ()

virtual QgsAuthMethodConfigsMap	authMethodConfigs (const QStringList &allowedMethods=QStringList()) const =0
	Returns a mapping of authentication configurations available from this storage.

virtual QgsAuthMethodConfigsMap	authMethodConfigsWithPayload () const =0
	Returns a mapping of authentication configurations available from this storage.

virtual bool	authSettingExists (const QString &key) const =0
	Check if an authentication setting exists in the storage.

virtual const QList< QSslCertificate >	caCerts () const =0
	Returns the list of CA certificates in the storage.

virtual const QMap< QString, QgsAuthCertUtils::CertTrustPolicy >	caCertsPolicy () const =0
	Returns the map of CA certificates hashes in the storages and their trust policy.

Qgis::AuthConfigurationStorageCapabilities	capabilities () const
	Returns the capabilities of the storage.

virtual bool	certAuthorityExists (const QSslCertificate &cert) const =0
	Check if a certificate authority exists.

virtual QStringList	certAuthorityIds () const =0
	Returns the list of certificate authority IDs in the storage.

virtual const QList< QSslCertificate >	certIdentities () const =0
	certIdentities get certificate identities

virtual bool	certIdentityExists (const QString &id) const =0
	Check if the certificate identity exists.

virtual QStringList	certIdentityIds () const =0
	certIdentityIds get list of certificate identity ids from database

virtual bool	certTrustPolicyExists (const QSslCertificate &cert) const =0
	Check if certificate trust policy exists.

virtual bool	clearMasterPasswords ()=0
	Remove all master passwords from the database.

virtual bool	clearMethodConfigs ()=0
	Remove all authentications configurations from the storage.

virtual QString	description () const =0
	Returns a human readable localized description of the storage implementation (e.g.

virtual bool	erase ()=0
	Completely erase the storage removing all configurations/certs/settings etc.

virtual QString	id () const =0
	Returns the unique identifier of the storage object.

virtual bool	initialize ()
	Initializes the storage.

bool	isEnabled () const
	Returns `true` if the storage is enabled.

bool	isEncrypted () const
	Returns `true` if the storage is encrypted.

virtual bool	isReadOnly () const
	Returns `true` if the storage is read-only, `false` otherwise.

virtual bool	isReady () const =0
	Returns `true` is the storage is ready to be used.

virtual QString	lastError () const
	Returns the last error message.

virtual QString	loadAuthSetting (const QString &key) const =0
	Load an authentication setting from the storage.

virtual const QSslCertificate	loadCertAuthority (const QString &id) const =0
	certAuthority get a certificate authority by id (sha hash)

virtual const QSslCertificate	loadCertIdentity (const QString &id) const =0
	certIdentity get a certificate identity by id (sha hash)

virtual const QPair< QSslCertificate, QString >	loadCertIdentityBundle (const QString &id) const =0
	Returns a certificate identity bundle by id (sha hash).

virtual QgsAuthCertUtils::CertTrustPolicy	loadCertTrustPolicy (const QSslCertificate &cert) const =0
	Load certificate trust policy.

virtual QgsAuthMethodConfig	loadMethodConfig (const QString &id, QString &payload, bool full=false) const =0
	Load an authentication configuration from the database.

virtual const QgsAuthConfigSslServer	loadSslCertCustomConfig (const QString &id, const QString &hostport) const =0
	Loads an SSL certificate custom config by id (sha hash) and hostport (host:port)

virtual const QgsAuthConfigSslServer	loadSslCertCustomConfigByHost (const QString &hostport) const =0
	Loads an SSL certificate custom config by hostport (host:port)

virtual const QList< QgsAuthConfigurationStorage::MasterPasswordConfig >	masterPasswords () const =0
	Returns the list of (encrypted) master passwords stored in the database.

virtual bool	methodConfigExists (const QString &id) const =0
	Check if an authentication configuration exists in the storage.

virtual QString	name () const =0
	Returns a human readable localized short name of the storage implementation (e.g "SQLite").

virtual bool	removeAuthSetting (const QString &key)=0
	Remove an authentication setting from the storage.

virtual bool	removeCertAuthority (const QSslCertificate &cert)=0
	Remove a certificate authority.

virtual bool	removeCertIdentity (const QSslCertificate &cert)=0
	Remove a certificate identity from the storage.

virtual bool	removeCertIdentity (const QString &id)=0
	Remove a certificate identity from the storage.

virtual bool	removeCertTrustPolicy (const QSslCertificate &cert)=0
	Remove certificate trust policy.

virtual bool	removeMethodConfig (const QString &id)=0
	Removes the authentication configuration with the specified id.

virtual bool	removeSslCertCustomConfig (const QString &id, const QString &hostport)=0
	Remove an SSL certificate custom config.

void	setEnabled (bool enabled)
	Set the storage enabled status to enabled.

virtual void	setReadOnly (bool readOnly)
	Utility method to unset all editing capabilities.

QMap< QString, QVariant >	settings () const
	Returns the settings of the storage.

virtual QList< QgsAuthConfigurationStorage::SettingParameter >	settingsParameters () const =0
	Returns a list of the settings accepted by the storage.

virtual bool	sslCertCustomConfigExists (const QString &id, const QString &hostport)=0
	Check if SSL certificate custom config exists.

virtual QStringList	sslCertCustomConfigIds () const =0
	Returns the list of SSL certificate custom config ids.

virtual const QList< QgsAuthConfigSslServer >	sslCertCustomConfigs () const =0
	sslCertCustomConfigs get SSL certificate custom configs

virtual bool	storeAuthSetting (const QString &key, const QString &value)=0
	Store an authentication setting in the storage.

virtual bool	storeCertAuthority (const QSslCertificate &cert)=0
	Store a certificate authority.

virtual bool	storeCertIdentity (const QSslCertificate &cert, const QString &keyPem)=0
	Store a certificate identity in the storage.

virtual bool	storeCertTrustPolicy (const QSslCertificate &cert, QgsAuthCertUtils::CertTrustPolicy policy)=0
	Store certificate trust policy.

virtual bool	storeMasterPassword (const QgsAuthConfigurationStorage::MasterPasswordConfig &config)=0
	Store a master password in the database.

virtual bool	storeMethodConfig (const QgsAuthMethodConfig &config, const QString &payload)=0
	Store an authentication config in the database.

virtual bool	storeSslCertCustomConfig (const QgsAuthConfigSslServer &config)=0
	Store an SSL certificate custom config.

virtual QString	type () const =0
	Returns the type of the storage implementation.

Protected Member Functions
void	checkCapability (Qgis::AuthConfigurationStorageCapability capability) const
	Utility to check capability and throw QgsNotSupportedException if not supported.

virtual QString	loggerTag () const
	Returns the logger tag for the storage.

void	setCapabilities (Qgis::AuthConfigurationStorageCapabilities capabilities)
	Set the capabilities of the storage to capabilities.

void	setError (const QString &error, Qgis::MessageLevel level=Qgis::MessageLevel::Critical)
	Set the last error message to error with message level level.

Protected Attributes
Qgis::AuthConfigurationStorageCapabilities	mCapabilities
	Store the capabilities of the storage.

QMap< QString, QVariant >	mConfiguration
	Store the implementation-specific configuration.

bool	mIsEnabled = true
	Store whether the storage is enabled.

bool	mIsEncrypted = true
	Store whether the storage is encrypted.

bool	mIsReadOnly = false
	Store whether the storage is read-only.

QString	mLastError
	Store the last error message.

Detailed Description

Abstract class that defines the interface for all authentication configuration storage implementations.

Since: QGIS 3.40

Definition at line 36 of file qgsauthconfigurationstorage.h.

Constructor & Destructor Documentation

◆ QgsAuthConfigurationStorage()

QgsAuthConfigurationStorage::QgsAuthConfigurationStorage ( const QMap< QString, QVariant > & settings )

Creates a new authentication configuration storage.

Parameters

settings Implementation-specific configuration settings.

Definition at line 19 of file qgsauthconfigurationstorage.cpp.

◆ ~QgsAuthConfigurationStorage()

virtual QgsAuthConfigurationStorage::~QgsAuthConfigurationStorage ( )

inlinevirtual

Definition at line 68 of file qgsauthconfigurationstorage.h.

Member Function Documentation

◆ authMethodConfigs()

virtual QgsAuthMethodConfigsMap QgsAuthConfigurationStorage::authMethodConfigs ( const QStringList & allowedMethods = QStringList() ) const

pure virtual

Returns a mapping of authentication configurations available from this storage.

Parameters

allowedMethods Optional filter to return only configurations for specific authentication methods.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ authMethodConfigsWithPayload()

virtual QgsAuthMethodConfigsMap QgsAuthConfigurationStorage::authMethodConfigsWithPayload ( ) const

pure virtual

Returns a mapping of authentication configurations available from this storage.

The encrypted payload is added to the configuration as "encrypted_payload" key.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage

Note: This convenience method is used by the authentication manager to retrieve the configurations and check if it can decrypt all of them, it is faster than retrieve all the configurations one by one.

Implemented in QgsAuthConfigurationStorageDb.

◆ authSettingExists()

virtual bool QgsAuthConfigurationStorage::authSettingExists ( const QString & key ) const

pure virtual

Check if an authentication setting exists in the storage.

Parameters

key	Setting key.

Returns: true if the setting exists, false otherwise.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ authSettingsChanged

void QgsAuthConfigurationStorage::authSettingsChanged ( )

signal

Emitted when the storage auth settings table was changed.

◆ caCerts()

virtual const QList< QSslCertificate > QgsAuthConfigurationStorage::caCerts ( ) const

pure virtual

Returns the list of CA certificates in the storage.

Returns: list of CA certificates

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ caCertsPolicy()

virtual const QMap< QString, QgsAuthCertUtils::CertTrustPolicy > QgsAuthConfigurationStorage::caCertsPolicy ( ) const

pure virtual

Returns the map of CA certificates hashes in the storages and their trust policy.

Returns: map of CA certificates hashes and their trust policy

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ capabilities()

Qgis::AuthConfigurationStorageCapabilities QgsAuthConfigurationStorage::capabilities ( ) const

Returns the capabilities of the storage.

Definition at line 76 of file qgsauthconfigurationstorage.cpp.

◆ certAuthorityChanged

void QgsAuthConfigurationStorage::certAuthorityChanged ( )

signal

Emitted when the storage cert authority table was changed.

◆ certAuthorityExists()

virtual bool QgsAuthConfigurationStorage::certAuthorityExists ( const QSslCertificate & cert ) const

pure virtual

Check if a certificate authority exists.

Parameters

cert	Certificate authority

Returns: true if the certificate authority exists, false otherwise

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ certAuthorityIds()

virtual QStringList QgsAuthConfigurationStorage::certAuthorityIds ( ) const

pure virtual

Returns the list of certificate authority IDs in the storage.

Returns: list of certificate authority IDs

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ certIdentities()

virtual const QList< QSslCertificate > QgsAuthConfigurationStorage::certIdentities ( ) const

pure virtual

certIdentities get certificate identities

Returns: list of certificates

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ certIdentityChanged

void QgsAuthConfigurationStorage::certIdentityChanged ( )

signal

Emitted when the storage cert identity table was changed.

◆ certIdentityExists()

virtual bool QgsAuthConfigurationStorage::certIdentityExists ( const QString & id ) const

pure virtual

Check if the certificate identity exists.

Parameters

id	Certificate identity id

Returns: true if the certificate identity exists, false otherwise

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ certIdentityIds()

virtual QStringList QgsAuthConfigurationStorage::certIdentityIds ( ) const

pure virtual

certIdentityIds get list of certificate identity ids from database

Returns: list of certificate ids

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ certTrustPolicyExists()

virtual bool QgsAuthConfigurationStorage::certTrustPolicyExists ( const QSslCertificate & cert ) const

pure virtual

Check if certificate trust policy exists.

Parameters

cert	Certificate

Returns: true if the certificate trust policy exists, false otherwise

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ checkCapability()

void QgsAuthConfigurationStorage::checkCapability ( Qgis::AuthConfigurationStorageCapability capability ) const

protected

Utility to check capability and throw QgsNotSupportedException if not supported.

Note: Not available in SIP bindings.

Definition at line 118 of file qgsauthconfigurationstorage.cpp.

◆ clearMasterPasswords()

virtual bool QgsAuthConfigurationStorage::clearMasterPasswords ( )

pure virtual

Remove all master passwords from the database.

Returns: true if operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ clearMethodConfigs()

virtual bool QgsAuthConfigurationStorage::clearMethodConfigs ( )

pure virtual

Remove all authentications configurations from the storage.

Returns: true if authentications configurations were removed, false otherwise.

Note: This method does not remove certificate and other assets.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ description()

virtual QString QgsAuthConfigurationStorage::description ( ) const

pure virtual

Returns a human readable localized description of the storage implementation (e.g.

"Store credentials in a local SQLite database"). This description is displayed to the user.

Implemented in QgsAuthConfigurationStorageDb.

◆ erase()

virtual bool QgsAuthConfigurationStorage::erase ( )

pure virtual

Completely erase the storage removing all configurations/certs/settings etc.

Returns: true if storage was completely erased, false if any error occurred.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage (e.g. the storage is read-only).

Implemented in QgsAuthConfigurationStorageDb.

◆ id()

virtual QString QgsAuthConfigurationStorage::id ( ) const

pure virtual

Returns the unique identifier of the storage object.

The id is used to uniquely identify the storage object (e.g. the path or the connection URI to a storage configuration).

Implemented in QgsAuthConfigurationStorageDb.

◆ initialize()

virtual bool QgsAuthConfigurationStorage::initialize ( )

inlinevirtual

Initializes the storage.

Returns: true if the storage was successfully initialized, false otherwise. If the storage is already initialized, this method does nothing and returns true.

Note: The default implementation does nothing and returns true. This method is called by the authentication manager when the storage is added to the manager.

Reimplemented in QgsAuthConfigurationStorageDb.

Definition at line 103 of file qgsauthconfigurationstorage.h.

◆ isEnabled()

bool QgsAuthConfigurationStorage::isEnabled ( ) const

Returns true if the storage is enabled.

Definition at line 92 of file qgsauthconfigurationstorage.cpp.

◆ isEncrypted()

bool QgsAuthConfigurationStorage::isEncrypted ( ) const

Returns true if the storage is encrypted.

Definition at line 102 of file qgsauthconfigurationstorage.cpp.

◆ isReadOnly()

bool QgsAuthConfigurationStorage::isReadOnly ( ) const

virtual

Returns true if the storage is read-only, false otherwise.

See also: setReadOnly()

Definition at line 65 of file qgsauthconfigurationstorage.cpp.

◆ isReady()

virtual bool QgsAuthConfigurationStorage::isReady ( ) const

pure virtual

Returns true is the storage is ready to be used.

Note: This method should be called after the initialize() method to check whether the initialization was properly completed.

Implemented in QgsAuthConfigurationStorageDb.

◆ lastError()

QString QgsAuthConfigurationStorage::lastError ( ) const

virtual

Returns the last error message.

Definition at line 71 of file qgsauthconfigurationstorage.cpp.

◆ loadAuthSetting()

virtual QString QgsAuthConfigurationStorage::loadAuthSetting ( const QString & key ) const

pure virtual

Load an authentication setting from the storage.

Parameters

key	Setting key.

Returns: Setting value.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadCertAuthority()

virtual const QSslCertificate QgsAuthConfigurationStorage::loadCertAuthority ( const QString & id ) const

pure virtual

certAuthority get a certificate authority by id (sha hash)

Parameters

id sha hash

Returns: a (possibly empty) certificate

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadCertIdentity()

virtual const QSslCertificate QgsAuthConfigurationStorage::loadCertIdentity ( const QString & id ) const

pure virtual

certIdentity get a certificate identity by id (sha hash)

Parameters

id	sha hash of the cert

Returns: the certificate

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadCertIdentityBundle()

virtual const QPair< QSslCertificate, QString > QgsAuthConfigurationStorage::loadCertIdentityBundle ( const QString & id ) const

pure virtual

Returns a certificate identity bundle by id (sha hash).

Parameters

id sha shash

Returns: a pair with the certificate and its SSL key as an encrypted string

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadCertTrustPolicy()

virtual QgsAuthCertUtils::CertTrustPolicy QgsAuthConfigurationStorage::loadCertTrustPolicy ( const QSslCertificate & cert ) const

pure virtual

Load certificate trust policy.

Parameters

cert	Certificate

Returns: Trust policy

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadMethodConfig()

virtual QgsAuthMethodConfig QgsAuthConfigurationStorage::loadMethodConfig	(	const QString &	id,
		QString &	payload,
		bool	full = `false`
	)		const

pure virtual

Load an authentication configuration from the database.

Parameters

id	Configuration id.
payload	(possibly encrypted) payload.
full	If `true`, the full configuration is loaded and the (possibly encrypted) payload is populated, otherwise only the configuration metadata is loaded.

Returns: Authentication configuration metadata.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadSslCertCustomConfig()

virtual const QgsAuthConfigSslServer QgsAuthConfigurationStorage::loadSslCertCustomConfig	(	const QString &	id,
		const QString &	hostport
	)		const

pure virtual

Loads an SSL certificate custom config by id (sha hash) and hostport (host:port)

Parameters

id	sha hash
hostport	string host:port

Returns: a SSL certificate custom config

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loadSslCertCustomConfigByHost()

virtual const QgsAuthConfigSslServer QgsAuthConfigurationStorage::loadSslCertCustomConfigByHost ( const QString & hostport ) const

pure virtual

Loads an SSL certificate custom config by hostport (host:port)

Parameters

hostport host:port

Returns: a SSL certificate custom config

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ loggerTag()

QString QgsAuthConfigurationStorage::loggerTag ( ) const

protectedvirtual

Returns the logger tag for the storage.

The default implementation returns the literal "Auth storage" followed by the storage name.

Definition at line 113 of file qgsauthconfigurationstorage.cpp.

◆ masterPasswordChanged

void QgsAuthConfigurationStorage::masterPasswordChanged ( )

signal

Emitted when the storage master password table was changed.

◆ masterPasswords()

virtual const QList< QgsAuthConfigurationStorage::MasterPasswordConfig > QgsAuthConfigurationStorage::masterPasswords ( ) const

pure virtual

Returns the list of (encrypted) master passwords stored in the database.

Returns: list of master passwords

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ messageLog

void QgsAuthConfigurationStorage::messageLog	(	const QString &	message,
		const QString &	tag = `QStringLiteral("Authentication")`,
		Qgis::MessageLevel	level = `Qgis::MessageLevel::Info`
	)

signal

Custom logging signal to relay to console output and QgsMessageLog.

Parameters

message	Message to send
tag	Associated tag (title)
level	Message log level

See also: QgsMessageLog

◆ methodConfigChanged

void QgsAuthConfigurationStorage::methodConfigChanged ( )

signal

Emitted when the storage method config table was changed.

◆ methodConfigExists()

virtual bool QgsAuthConfigurationStorage::methodConfigExists ( const QString & id ) const

pure virtual

Check if an authentication configuration exists in the storage.

Parameters

id	Configuration id.

Returns: true if the configuration exists, false otherwise.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ name()

virtual QString QgsAuthConfigurationStorage::name ( ) const

pure virtual

Returns a human readable localized short name of the storage implementation (e.g "SQLite").

This name is displayed to the user and used to identify the storage implementation.

Implemented in QgsAuthConfigurationStorageDb.

◆ readOnlyChanged

void QgsAuthConfigurationStorage::readOnlyChanged ( bool readOnly )

signal

Emitted when the storage read-only status was changed.

◆ removeAuthSetting()

virtual bool QgsAuthConfigurationStorage::removeAuthSetting ( const QString & key )

pure virtual

Remove an authentication setting from the storage.

Parameters

key	Setting key.

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ removeCertAuthority()

virtual bool QgsAuthConfigurationStorage::removeCertAuthority ( const QSslCertificate & cert )

pure virtual

Remove a certificate authority.

Parameters

cert	Certificate authority

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ removeCertIdentity() [1/2]

virtual bool QgsAuthConfigurationStorage::removeCertIdentity ( const QSslCertificate & cert )

pure virtual

Remove a certificate identity from the storage.

Parameters

cert	Certificate.

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ removeCertIdentity() [2/2]

virtual bool QgsAuthConfigurationStorage::removeCertIdentity ( const QString & id )

pure virtual

Remove a certificate identity from the storage.

Parameters

id	Certificate identity id

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ removeCertTrustPolicy()

virtual bool QgsAuthConfigurationStorage::removeCertTrustPolicy ( const QSslCertificate & cert )

pure virtual

Remove certificate trust policy.

Parameters

cert	Certificate

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ removeMethodConfig()

virtual bool QgsAuthConfigurationStorage::removeMethodConfig ( const QString & id )

pure virtual

Removes the authentication configuration with the specified id.

Returns: true if the configuration was removed, false otherwise.

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ removeSslCertCustomConfig()

virtual bool QgsAuthConfigurationStorage::removeSslCertCustomConfig	(	const QString &	id,
		const QString &	hostport
	)

pure virtual

Remove an SSL certificate custom config.

Parameters

id	sha hash
hostport	host:port

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ setCapabilities()

void QgsAuthConfigurationStorage::setCapabilities ( Qgis::AuthConfigurationStorageCapabilities capabilities )

protected

Set the capabilities of the storage to capabilities.

Definition at line 81 of file qgsauthconfigurationstorage.cpp.

◆ setEnabled()

void QgsAuthConfigurationStorage::setEnabled ( bool enabled )

Set the storage enabled status to enabled.

Note: This is a user-controlled setting: the storage may be enabled but not ready to be used.

Definition at line 97 of file qgsauthconfigurationstorage.cpp.

◆ setError()

void QgsAuthConfigurationStorage::setError	(	const QString &	error,
		Qgis::MessageLevel	level = `Qgis::MessageLevel::Critical`
	)

protected

Set the last error message to error with message level level.

Definition at line 86 of file qgsauthconfigurationstorage.cpp.

◆ setReadOnly()

void QgsAuthConfigurationStorage::setReadOnly ( bool readOnly )

virtual

Utility method to unset all editing capabilities.

Note: This method does not alter existing capabilities, make sure subclasses recompute capabilities if needed.

Definition at line 56 of file qgsauthconfigurationstorage.cpp.

◆ settings()

QMap< QString, QVariant > QgsAuthConfigurationStorage::settings ( ) const

Returns the settings of the storage.

Definition at line 107 of file qgsauthconfigurationstorage.cpp.

◆ settingsParameters()

virtual QList< QgsAuthConfigurationStorage::SettingParameter > QgsAuthConfigurationStorage::settingsParameters ( ) const

pure virtual

Returns a list of the settings accepted by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ sslCertCustomConfigChanged

void QgsAuthConfigurationStorage::sslCertCustomConfigChanged ( )

signal

Emitted when the storage ssl cert custom config table was changed.

◆ sslCertCustomConfigExists()

virtual bool QgsAuthConfigurationStorage::sslCertCustomConfigExists	(	const QString &	id,
		const QString &	hostport
	)

pure virtual

Check if SSL certificate custom config exists.

Parameters

id	sha hash
hostport	host:port

Returns: true if the SSL certificate custom config exists, false otherwise

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ sslCertCustomConfigIds()

virtual QStringList QgsAuthConfigurationStorage::sslCertCustomConfigIds ( ) const

pure virtual

Returns the list of SSL certificate custom config ids.

Returns: list of SSL certificate custom config ids

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ sslCertCustomConfigs()

virtual const QList< QgsAuthConfigSslServer > QgsAuthConfigurationStorage::sslCertCustomConfigs ( ) const

pure virtual

sslCertCustomConfigs get SSL certificate custom configs

Returns: list of SSL certificate custom config

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ sslCertTrustPolicyChanged

void QgsAuthConfigurationStorage::sslCertTrustPolicyChanged ( )

signal

Emitted when the storage ssl cert trust policy table was changed.

◆ storageChanged

void QgsAuthConfigurationStorage::storageChanged ( const QString & id )

signal

Emitted when the storage was updated.

Parameters

id	The storage id

Note: This is a generic changed signal and it is normally emitted together with the dedicated signals which are provided for specific changes on the individual tables.

◆ storeAuthSetting()

virtual bool QgsAuthConfigurationStorage::storeAuthSetting	(	const QString &	key,
		const QString &	value
	)

pure virtual

Store an authentication setting in the storage.

Parameters

key	Setting key.
value	Setting value.

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ storeCertAuthority()

virtual bool QgsAuthConfigurationStorage::storeCertAuthority ( const QSslCertificate & cert )

pure virtual

Store a certificate authority.

Parameters

cert	Certificate authority

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ storeCertIdentity()

virtual bool QgsAuthConfigurationStorage::storeCertIdentity	(	const QSslCertificate &	cert,
		const QString &	keyPem
	)

pure virtual

Store a certificate identity in the storage.

Parameters

cert	Certificate.
keyPem	SSL key in PEM format.

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ storeCertTrustPolicy()

virtual bool QgsAuthConfigurationStorage::storeCertTrustPolicy	(	const QSslCertificate &	cert,
		QgsAuthCertUtils::CertTrustPolicy	policy
	)

pure virtual

Store certificate trust policy.

Parameters

cert	Certificate
policy	Trust policy

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ storeMasterPassword()

virtual bool QgsAuthConfigurationStorage::storeMasterPassword ( const QgsAuthConfigurationStorage::MasterPasswordConfig & config )

pure virtual

Store a master password in the database.

Parameters

config Master password configuration.

Returns: true if operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ storeMethodConfig()

virtual bool QgsAuthConfigurationStorage::storeMethodConfig	(	const QgsAuthMethodConfig &	config,
		const QString &	payload
	)

pure virtual

Store an authentication config in the database.

Parameters

config	Authentication configuration.
payload	payload to store (possibly encrypted).

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ storeSslCertCustomConfig()

virtual bool QgsAuthConfigurationStorage::storeSslCertCustomConfig ( const QgsAuthConfigSslServer & config )

pure virtual

Store an SSL certificate custom config.

Parameters

config SSL certificate custom config

Returns: Whether operation succeeded

Exceptions

QgsNotSupportedException if the operation is not supported by the storage.

Implemented in QgsAuthConfigurationStorageDb.

◆ type()

virtual QString QgsAuthConfigurationStorage::type ( ) const

pure virtual

Returns the type of the storage implementation.

The type is used to identify the storage implementation internally (e.g. "sqlite"). A valid type must be ASCII alphanumeric and contain no spaces.

Implemented in QgsAuthConfigurationStorageDb.

Member Data Documentation

◆ mCapabilities

Qgis::AuthConfigurationStorageCapabilities QgsAuthConfigurationStorage::mCapabilities

protected

Store the capabilities of the storage.

Definition at line 589 of file qgsauthconfigurationstorage.h.

◆ mConfiguration

QMap<QString, QVariant> QgsAuthConfigurationStorage::mConfiguration

protected

Store the implementation-specific configuration.

Definition at line 584 of file qgsauthconfigurationstorage.h.

◆ mIsEnabled

bool QgsAuthConfigurationStorage::mIsEnabled = true

protected

Store whether the storage is enabled.

Definition at line 604 of file qgsauthconfigurationstorage.h.

◆ mIsEncrypted

bool QgsAuthConfigurationStorage::mIsEncrypted = true

protected

Store whether the storage is encrypted.

Definition at line 599 of file qgsauthconfigurationstorage.h.

◆ mIsReadOnly

bool QgsAuthConfigurationStorage::mIsReadOnly = false

protected

Store whether the storage is read-only.

Definition at line 609 of file qgsauthconfigurationstorage.h.

◆ mLastError

QString QgsAuthConfigurationStorage::mLastError

mutableprotected

Store the last error message.

Definition at line 594 of file qgsauthconfigurationstorage.h.

The documentation for this class was generated from the following files:

/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/core/auth/qgsauthconfigurationstorage.h
/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/core/auth/qgsauthconfigurationstorage.cpp

Classes

Signals

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ QgsAuthConfigurationStorage()

◆ ~QgsAuthConfigurationStorage()

Member Function Documentation

◆ authMethodConfigs()

◆ authMethodConfigsWithPayload()

◆ authSettingExists()

◆ authSettingsChanged

◆ caCerts()

◆ caCertsPolicy()

◆ capabilities()

◆ certAuthorityChanged

◆ certAuthorityExists()

◆ certAuthorityIds()

◆ certIdentities()

◆ certIdentityChanged

◆ certIdentityExists()

◆ certIdentityIds()

◆ certTrustPolicyExists()

◆ checkCapability()

◆ clearMasterPasswords()

◆ clearMethodConfigs()

◆ description()

◆ erase()

◆ id()

◆ initialize()

◆ isEnabled()

◆ isEncrypted()

◆ isReadOnly()

◆ isReady()

◆ lastError()

◆ loadAuthSetting()

◆ loadCertAuthority()

◆ loadCertIdentity()

◆ loadCertIdentityBundle()

◆ loadCertTrustPolicy()

◆ loadMethodConfig()

◆ loadSslCertCustomConfig()

◆ loadSslCertCustomConfigByHost()

◆ loggerTag()

◆ masterPasswordChanged

◆ masterPasswords()

◆ messageLog

◆ methodConfigChanged

◆ methodConfigExists()

◆ name()

◆ readOnlyChanged

◆ removeAuthSetting()

◆ removeCertAuthority()

◆ removeCertIdentity() [1/2]

◆ removeCertIdentity() [2/2]

◆ removeCertTrustPolicy()

◆ removeMethodConfig()

◆ removeSslCertCustomConfig()

◆ setCapabilities()

◆ setEnabled()

◆ setError()

◆ setReadOnly()

◆ settings()

◆ settingsParameters()

◆ sslCertCustomConfigChanged

◆ sslCertCustomConfigExists()

◆ sslCertCustomConfigIds()

◆ sslCertCustomConfigs()

◆ sslCertTrustPolicyChanged

◆ storageChanged

◆ storeAuthSetting()

◆ storeCertAuthority()

◆ storeCertIdentity()

◆ storeCertTrustPolicy()

◆ storeMasterPassword()

◆ storeMethodConfig()

◆ storeSslCertCustomConfig()

◆ type()